How Long Before Putting Food in New Fridge?

How Long to Wait Before Putting Food in a New Refrigerator


It’s finally here, your new refrigerator! When you buy a new appliance, you can’t wait to break it in, use it, and really make the most of it, yes? But hold your horses! There are some steps you should take before you use it, especially when thinking about putting food in the new fridge.

But, before you dash out the door and begin unloading groceries, take a moment to consider the following:

When it comes to putting food in a new refrigerator, how long should you wait?

The response is contingent on the type of refrigerator you recently purchased.

Although the refrigerator in your kitchen which appear to be a simple appliance, there are many factors to consider when determining how long to wait before filling it with food.


The length of time you must wait is largely determined by three factors: the refrigerator’s size, temperature, and location.


A refrigerator is a vital household product that must be treated with care. If you just purchased a new refrigerator, you can wait at least 2 hours and up to 24 hours before putting food inside.

You’ll have to wait until the refrigerator is fully functioning. This will assist the refrigerator in performing its functions properly, as well as allowing the refrigerator to obtain the following.

  1. Internal Temperature Control.
  2. Water that has been properly cooled.
  3. The first batches of ice were made.

The best temperature for loading food into a refrigerator varies depending on the type and brand of refrigerator. Depending on the power and temperature regulation, the refrigerator will take anywhere from 2 to 24 hours to reach its ideal temperature.

How Long Should You Wait To Turn On A New Refrigerator?

While we’re talking about a new refrigerator, you should also consider how it was delivered to your place. If it was brought upright or on its side, both of these factors must be considered, and appropriate action must be taken to prolong the refrigerator’s existence.

You should ask the company that delivered your new refrigerator to understand the position it was in prior.

Why is this information important for new refrigerators? The lubricant and gas are transmitted through the pipes in a refrigerator. Before the fridge can be turned on, these pipes must be fully settled. If the new refrigerator was shipped in a straight position, it would take about two hours to turn on.

If it was transported on its side, however, you could wait four hours to allow the lubricant and gas to settle properly. Some refrigerators, such as Whirlpool’s, can take up to 24 hours to turn on.

Generally, you can apply this principle for new refrigerators, in order to be on the safe side 2 hours is the minimum timeframe before you can wait before putting food in a new refrigerator.

How Long Should You Wait Before Loading Your New Refrigerator With Food, and Why is it So Important?

You must offer your new refrigerator at least 2 hours to reach the precise temperature needed for proper food preservation.

Samsung also makes this recommendation on its website. They also mentioned that the reason for switching the refrigerator after 2 hours to hold your food is to ensure that it is working properly.

Before turning on any refrigerators, you must wait at least 24 hours. This is due to the fact that this refrigerator has a lot of features, such as ice making, and it takes at least 24 hours to fill up the ice container.

What Are the Cons of Loading the Refrigerator Before the Two-Hour Time Limit?

The average temperature of a refrigerator is determined by the thermostat settings. The two-hour time allotted for the refrigerator allows the refrigerator to reach its optimum temperature.

If you put your food in the refrigerator before it reaches its ideal temperature, it will take even longer for it to cool, causing the refrigerator to work harder and costing you money.

If the food must be frozen, the cold will not enter it through the walls, and the food will not properly freeze.

This may also indicate that the freezer’s average temperature would be higher than the recommended temperature.

When making a purchase, you will need to consider a number of factors. Refrigerators are important for storing food and a variety of other household products.

How Long Does it Take a New Refrigerator to Get Cold Enough to Use?

As mentioned in the previous passage, it takes a few hours to get your new refrigerator to get cold enough for use. If you have food that is sensitive to temperature, i’d hold off placing the refrigerator inside until about two hours.

The two hour timeframe is the generally the default standard to ensure the new refrigerator gets cold enough for proper use. After the two hour mark has passed, ensure that you test the temperature and check the thermostat within the refrigerator.

Most new refrigerators should have an internal thermostat. If your new refrigerator doesn’t have an internal thermostat you can simply use the back side of your hand to test.

You can compare temperatures between what you own already and the new refrigerator to see if it is cold enough.

How Long After Plugging in a Fridge Can it be Used?

Although we have a general standard of two hours, this is after the settings have been appropriately set on the fridge.

There are a variety of new refrigerators on the market that have a plethora of settings. After plugging in the refrigerator AND setting the appropriate internal temperature of the new refrigerator, THEN you can start the two hour clock.

This should be enough time to ensure that your fridge can be used after plugging in.

Final Thoughts

To sum it up, let’s take a look at the most important stuff you should remember.

However, if you’re switching food from an old refrigerator to a new refrigerator, you’ll need to be cautious about how you do it to avoid spoilage.

If you’re transferring food from an old refrigerator to a new one, you’ll want to keep the temperature constant.

If the food was kept at a higher temperature in the old refrigerator, it would need to be refrigerated as soon as possible in the new one.

Before turning on the refrigerator and putting the food inside, make sure you’ve remembered the place in which it was delivered and that you’ve given it the recommended amount of time.